Raritan EMX2-888, Руководство пользователя

Страница: 279 / 568

Chapter 6: Using the Web Interface
265
a. Video - the webcam is in video mode. Set the Framerate (frames
per second) rate.
b. Snapshot - the webcam displays images from the webcam. Set
the "Time between Snapshots" rate as measured in seconds.
7. Click OK. The image or video from the webcam is now available in
the EMX once you click on the webcam in the navigation tree.
To edit a webcam configuration:
1. In the navigation tree, click on the Webcam Management folder. The
Webcam Management page opens.
2. Double-click on the webcam you want to edit. The webcam image or
video opens in a new tab.
3. Click Setup .
4. Edit the information as needed. Changes to the resolution do not
apply to existing, stored images - it applies only to images and
videos taken after the resolution is changed.
5. Click OK.
Configuring Webcam Storage
Once a snapshot is taken using the Store Snapshot to Webcam Storage
feature, it is stored locally on the EMX by default. Up to ten (10) images
can be stored on the EMX at once.
To save more than 10 snapshots, save the images on a Common
Internet File System/Samba.
Note: NFS and FTP are not supported for this release and are disabled
on the dialog.
Snapshot files are saved as JPG files. The snapshot file is named based
on the number of the snapshot starting from 1. So the first snapshot that
is taken is named 1.jpg, the second is 2.jpg and so on.
Unless snapshots are deleted manually, the oldest snapshot is
automatically deleted from the device when the number of snapshots
exceeds ten. Rebooting the EMX deletes all webcam snapshots that are
saved on the device.
To configure another storage location for images:
1. In the navigation tree, click Snapshots under the Webcam
Management folder. The Snapshots page opens.
2. Click on the Setup Storage icon . The Storage Setup dialog
opens.