Polycom RealPresence 2000 Скачать руководство пользователя страница 587

Страница: 587 / 1130

Polycom, Inc.

19-1

Gateway Calls

The RealPresence Collaboration Server (RMX) can be used as a gateway that provides

connectivity across different physical networks and translates multiple protocols for point-

to-point rich media communications.
The RMX supports the widest range of video and audio algorithms. It allows sites with

different frame rates, connection speeds, audio algorithms, video resolutions and network

protocols to transparently connect with one another. It also enables multipoint conference

creation from an endpoint.
A special conference acting as a

Gateway Session

is created on the RMX. It includes one dial-

in connection of the endpoint initiating the

Gateway Session

and one or several dial-out

connections to endpoints. It provides connectivity between the various protocols: H.323,

SIP, ISDN and PSTN.
To enable the gateway functionality a special Gateway Profile is defined on the RMX.

Gateway Functionality

The following features and capabilities are supported in gateway calls:
•

Gateway Sessions

are in CP mode only.

If Video Switching is selected in the

Profile

assigned to the

Gateway Session

, the system

ignores this setting and will run the

Gateway Session

in CP mode.

—

From Version 7.2,

Gathering

phase is not supported in gateway calls, even if it is

defined in the Profile assigned to the

Gateway Profil

•

H.239 Content

•

FECC - IP participants only as FECC is not supported by the ISDN protocol.

•

Recording. The

Recording Link

is not considered as a participant and therefore, the

gateway session will automatically end when only one of the participants remains

connected in addition to the recording link. The video of the

Recording Link

is not

included in the display of the video of the gateway call.

•

Forwarding of DTMF codes from the

Gateway Session

to a conference running on

another gateway, MCU or DMA. This enables the participant to enter the required

conference and/or chairperson password when connecting to another conference.

DTMF forwarding is enabled when there are only two participants connected to the

Gateway Session

•

Forwarding of all

DTMF

codes sent by participants in the

Gateway Session

to all

PSTN

and

ISDN

participants. This is enabled by adding the

ALWAYS_FORWARD_DTMF_IN_GW_SESSION_TO_ISDN

System Flag

system.cfg

and setting its value to

YES

Gateway calls are supported in AVC Conferencing Mode only.

Содержание RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды

Polycom RealPresence 2000, Руководство администратора

Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды