Polycom RealPresence 2000 Скачать руководство пользователя страница 509

Страница: 509 / 1130

Chapter 16-Network Services

Polycom, Inc.

16-55

Guidelines

•

Multiple Services system mode is a purchasable option and it is enabled in the MCU

license.

•

Multiple Services system mode is enabled when the system configuration flag

MULTIPLE_SERVICES

is added and set to

YES

•

This option is supported with MPM+ and MPMx media cards.

•

Multiple Network Services are supported in MCUs with at least 1024MB memory only.

MCU units with memory of 512MB support only one IP Network Service.

•

Multiple Network Services are not supported with Microsoft ICE Environments in

versions prior to

Version 7.8

•

Only IPv4 is supported for the definition of Multiple Network Services.

•

On the

RealPresence Collaboration Server (RMX) 1500

, up to two Network Services, one

per LAN port, can be associated with each Media card.

•

On the

RealPresence Collaboration Server (RMX) 2000

RealPresence Collaboration Server

(RMX) 4000

, RTM ISDN or RTM LAN can be used for Multiple Services

configuration.However, if RTM ISDN is installed and used for Multiple Services

configuration, only one Network Service can be associated with the media card to

which the RTM ISDN card is attached.

•

On the

RealPresence Collaboration Server (RMX) 1500

, when Multiple Network Services

option is enabled, the two networks must differ in their subnet masks.

•

On the

RealPresence Collaboration Server (RMX) 1500

, LAN redundancy cannot be

enabled in parallel to Multiple Networks and the

LAN_REDUNDANCY

flag must be

set to

when the Multiple Networks option is enabled.

•

An IP Network Service can be associated with one or several media cards.

•

If more than one card is associated with the same Network Service, the system routes

the calls to the appropriate card according to resource availability.

•

Participants on different networks can connect to the same conference with full audio,

video and content capabilities.

•

Traffic on one network does not influence or affect the traffic on other networks

connected to the same MCU, unless they are connected to the same media card. If one

network fails, it will not affect the traffic in the other connected networks, unless they

are connected to the same media card and the card fails.

•

Maximum number of services that can be defined per

RMX

platform:

The

MULTIPLE_SERVICE

System Flag

cannot be set to

YES

when

IPv6 Addressing

is enabled.

Table 16-29

Maximum Number of Network Services per RMX System

MCU

Total
Media
Cards

Network Services
(Up to 2 per Media Card)

Management
Services

Network Services
that Include ICE
(1 / Media Card)

1500

Up to 2

2000

Up to 2 (combination of RTM
ISDN and/or RTM LAN)

Содержание RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды

Polycom RealPresence 2000, Руководство администратора

Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды