Polycom RealPresence 2000, Руководство администратора

Страница: 1055 / 1130

Appendix H-Setting the RMX for Integration Into Microsoft Environment
Polycom, Inc.
H-75
For detailed description of ICE Active alarms, see " ICE Active Alarms” on page H-77 .
Active Alarms and Troubleshooting
Active Alarms
The following active alarms may be displayed in the RMX System Alerts pane when the RMX
is configured for integration in the OCS environment:
ICE Participant IP
Address The IP address and the Port number of the endpoint used to pass
through the media. This information changes according to the
ICE
connection type:
•
When ICE connection type is local , it is identical to the IP
address:Port displayed in the Participant IP Address.
•
When ICE connection type is relay , the system displays the IP
address and port number of the relay server used to pass the
media from the participant to the RMX.
•
When ICE connection type is firewall , the system displays the
public IP address and port of the endpoint as seen outside the
private network.
ICE Connection Type Indicates the type of connection between the RMX and the participant
in the ICE environment:
•
Local (or Host) - The endpoint (Remote) is on the same network
as the RMX and the media connection is direct, using local
addresses.
•
Relay - Media between the RMX and the participant passes
through a media relay server.
•
Firewall - Media connection between the RMX and the participant
is done using their external IP addresses (the IP addresses as
seen outside of the local network).
Table H-10 Participant Properties - ICE Connection Parameters (Continued)
Field Description
Table H-11 New Active Alarms
Alarm Code Alarm Description
SIP TLS: Failed to load or verify
certificate files This alarm indicates that the certificate files required for SIP TLS
could not be loaded to the RMX. Possible causes are:
•
Incorrect certificate file name. Only files with the following
names can be loaded to the system: rootCA.pem, pkey.pem,
cert.pem and certPassword.txt
•
Wrong certificate file type. Only files of the following types
can be loaded to the system: rootCA.pem, pkey.pem and
cert.pem and certPassword.txt
•
The contents of the certificate file does not match the system
parameters