Polycom RealPresence 2000, Руководство администратора

Страница: 986 / 1130

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
H-6
Polycom, Inc.
Integrating the RMX into the Microsoft Office
Communications Server Environment
When the RMX is integrated into the Office Communications Server environment, calls to
conferences running on the RMX can be routed using Matched URI dialing and/or
Numerical dialing.
Both routing methods (numerical dialing and Matched URI dialing) can be enabled
simultaneously in the Office Communications Server and the RMX system or you can
enable one of these methods, depending on your environment requirements.
In both methods, the RMX configuration is the same.
Setting the Matched URI Dialing Method
To enable the Matched URI dialing method the following tasks have to be completed:
Office Communications Server side:
1 Set the Static Route & Trusted Host for RMX in the Office Communications Server.
2 Optional if Load Balancer Server is present. Set the Static Route & Trusted Host for
RMX in the Load Balancer server.
RMX side:
The following tasks are detailed in " Configuring the Collaboration Server for Microsoft
Integration” on page H-36 .
3
Modify the Management Network Service to include the DNS server and set the
Transport Type to TLS.
4 Create the security certificate (using one of the two available methods)
5 Define a SIP Network Service in the RMX and install the TLS certificate.
6
Modify and add the required system flags in the RMX System Configuration.
7 Optional. Defining additional Entry Queues and Meeting Rooms in the RMX
environment. For more information see "Defining a New Entry Queue” on page 7-3 and
"Creating a New Meeting Room” on page 6-4 .
For a detailed description of the configuration of the Polycom conferencing components for
the integration in Microsoft Office Communications Server 2007 see Polycom® HDX and
RMX™ Systems Integration with Microsoft Office Communications Server 2007 Deployment
Guide.
In ICE environment, to enable the Matched URI dialing in the federated environment to be
able to connect to the RMX SIP signaling domain, you must also configure the Office
Communications Server. When federating an Office Communications Server edge server
with another Office Communications Server environment, you need to include the FQDN of
the Office Communications Server edge server as well as the SIP signaling domain for
federated environment. The SIP signaling domain is the FQDN of the Polycom DMA system
or a Polycom RMX system (when your deployment does not include a DMA system).
Note: The RMX does not support working with multiple edge servers.
From Version 7.0.x, Microsoft R1 is not supported with RMX systems.