Polycom RealPresence 2000, Руководство администратора

Страница: 570 / 1130

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
17-36
Polycom, Inc.
• If the destination number is not entered in a specific amount of time (defined in
Timeout for user input in the IVR Services - Global tab), the participant is prompted to
enter a destination number again. Depending on the Number of user input retries as
defined in the IVR Services - Global tab, the system will attempt to receive the required
input. When all the retries have failed, the call to the invited participant is cancelled.
Guidelines
• Inviting other participants is available to AVC-enabled participants only.
• Participants can be invited to Event Mode, and CP and VSW conferences.
• All network protocols are supported (H.323, SIP, ISDN, and PSTN). It is recommended
to select PSTN and not ISDN if PSTN is the only destination protocol. If both PSTN and
ISDN are enabled, it is recommended to select the PSTN before ISDN as the connection
process for PSTN endpoints will be quicker.
• In an Multiple IP Networks environment, the system will try to connect the participant
using each of the IP Network Services listed in the Conference Profile - Network Services
dialog box. Network services that are excluded from this list are skipped during the
dialing sequence.
• In Event Mode conferences, the invited participant connection parameters must match
one of the conference levels.
• In CP conferences, the participant initiating the invitation to another participant is able
to view the dialing information and connection status. During the dialing process, the
dialing string is displayed as the participant name which is replaced by the site name
when connected to the conference.
• By default, all participants (Everyone) are granted permission to invite a participant to
join a conference. To change the permission to the Chairperson, modify the Permission
column in the IVR Service - DTMF Codes tab.
Enabling the Invite Participants using DTMF Option
The option to invite participants to a conference using the DTMF keypad is enabled in the
following Conference IVR Services dialog boxes:
• General
• Video Services
• DTMF Codes
To enable the Invite Participant using DTMF on the RMX :
1
Open an existing or define a new Conference IVR Service .
Conference IVR Service - Global dialog box opens .
2
Click the General tab.