Polycom RealPresence 2000 Скачать руководство пользователя страница 258

Страница: 258 / 1130

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide

5-22

Polycom, Inc.

Creating the Cascade-enabled Entry Queue

The cascade-enabled Entry Queue maintains the correct behavior of the cascaded link when

it dials into it.

When cascading High Definition (HD) conferences, the cascade-enabled Entry Queue must

have the same settings as both cascaded conferences and the participants in both

conferences must use the same line rate and HD capabilities as set for the conferences and

Entry Queue.

To Define a Cascade-Enabled Entry Queue:

In the

RMX Management

pane, click the

Entry Queues

button.

The

Entry Queues

list pane is displayed.

Click the

New Entry Queue

button.

The

New Entry Queue

dialog box is displayed.

Define the standard Entry Queue parameters (as described in Chapter 3).

In the

Cascade

field, select

Master

Slave

depending on the Master/Slave relationship.

—

Set this field to

Master

if the Entry Queue is defined on the MCU that is at the

center of the topology and other conferences dial into it (acting as the Master).

—

Set this field to

Slave

if the Entry Queue is defined on the MCU acting as a Slave,

that is, to which the link from the Master MCU (MCU at the center of the topology)

is dialing.

If you are defining an HD cascaded Entry Queue, it is recommended to select the same

Profile that is selected for both conferences.

Click

The cascade-enabled Entry Queue should be used only to connect cascaded links and should not
be used to connect standard participants to conferences.

Содержание RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды

Polycom RealPresence 2000, Руководство администратора

Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды