Polycom RealPresence 2000 Скачать руководство пользователя страница 165

Страница: 165 / 1130

Chapter 4-Additional Conferencing Information

Polycom, Inc.

4-19

—

If HD1080p15 is provided, 2 HD video resources are allocated to the conference.

•

Optionally,

Content

can be sent at multiple resolutions to H.263 endpoints and H.264

endpoints whose resolution is lower than HD and support H.263 content. In this case an

additional resource is allocated.

•

Optionally,

Content

can be sent to cascaded RealPresence Collaboration Servers.

—

An additional resource is allocated to the conference, based on the content

resolution selected. The resolution sent is set in the

Conference Profile

when H.264

Cascade is selected.

—

All cascading conferences must be defined with the same content settings (content

line rate, resolution and frame rate).

—

A link that does not support the content settings cannot receive content.

•

If there are not enough resources available,

Multiple Content Resolutions

is disabled and

the conference does not include cascading links, content sharing mode reverts to Video

Switching mode.
If the conference includes cascading links, and the conference is set to H.264 Cascade

and SVC Optimized:

—

H.264-capable endpoints will share content using these settings.

—

H.263-capable endpoints will not share content and will receive the

content

over the

video (people) channel.

—

If H.264 Cascade was not selected for the conference, the H.264 HD protocol will be

used.

•

H.264 endpoints that are not HD capable and do not support H.263 will receive

content

over the video (people) channel.

•

TIP endpoints are not supported.

Content

will be displayed over the video (people)

channel.

•

AS SIP

is enabled for the conference,

Multiple

Resolutions

will be checked. H.264 will

be enabled, and both H.263 and H.264 Cascade will be hidden. This can improve

AS SIP

performance in high-traffic environments. In this case, resources are allocated

immediately when the conference is started.

Enabling Multiple Content Resolutions for Content Sharing

The Multiple Content Resolutions mode is enabled or disabled in the conference

Profile

, in

the

Video Quality

Tab.

Содержание RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды

Polycom RealPresence 2000, Руководство администратора

Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды