Polycom RealPresence 2000, Руководство администратора

Страница: 765 / 1130

Chapter 22-System Configuration Flags
Polycom, Inc.
22-35
PRESERVE_PARTY_CELL_
ON_FORCE_LAYOUT Used to prevent reassignment of cells in a forced layout that
were assigned to endpoints that have disconnected, paused
their video, or have been removed from the conference. The
cell will remain black until the endpoint reconnects or a new
layout is used, or the conference ends.
Range: YES / NO
Default: NO
•
NO - Cells of dropped endpoints are reassigned.
Endpoints that reconnect will be treated as new endpoints.
•
YES - Cells of dropped endpoints are not reassigned, but
will be reserved until the endpoint reconnects.
For information see the Polycom® RealPresence
Collaboration Server (RMX) 1500/2000/4000 Getting Started
Guide
, " ” on page 3-48 .
PSTN_RINGING_DURATIO
N_SECONDS If there is a slow response from the ISDN switch, the PSTN
dial-out ringing duration (in seconds) is used by the RMX to
disconnect the call.
Default: 45
QOS_IP_AUDIO Used to select the priority of audio packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x31
QOS_IP_VIDEO Used to select the priority of video packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x31
QOS_MANAGEMENT_NET
WORK Enter the DSCP value for the RMX Management Network .
Default: 0x10
Range: 0x00 - 0x3F
REDUCE_CAPS_FOR_RED
COM_SIP To accommodate deployments where some devices have
limits on the size of the SDP payload in SIP messages (such
as LSCs from Redcom running older software versions), when
the flag value = YES, the SDP size is less than 2kb and
includes only one audio and one video media line.
Default: NO
REDIAL_INTERVAL_IN_SEC
ONDS Enter the number of seconds that the RMX should wait before
successive re dialing attempts.
Range: 0-30 (Default: 10)
REDUCE_CAPS_FOR_RED
COM_SIP To accommodate Redcom’s SDP size limit, when the flag
value = YES, the SDP size is less than 2kb and includes only
one audio and one video media line.
Default: NO
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description