Polycom RealPresence 2000, Руководство администратора

Страница: 951 / 1130

Appendix D-Ad Hoc Conferencing and External Database Authentication
Polycom, Inc.
D-3
Entry Queue Level - Conference Initiation Validation with an External
Database Application
Starting a new conference with external database application validation entails the
following steps:
Figure D-2 Conference Initiation Validation with External Database Application
1
The participant dials in to an Ad Hoc-enabled Entry Queue.
2
The participant is requested to enter the Conference ID.
3
The participant enters the conference ID via his/her endpoint remote control using
DTMF codes. If there is an ongoing conference with this Conference ID, the participant
is moved to that conference where another authentication process can occur, depending
on the IVR Service configuration.
4
If there is no ongoing conference with that Conference ID, the MCU verifies the
Conference ID with the database application that compares it against its database. If the
database application finds a match, the external database application sends a response
back to the MCU, granting the participant the right to start a new ongoing conference.
If this Conference ID is not registered in the database, the conference cannot be started
and this participant is disconnected from the Entry Queue.
5
The external database contains a list of participants (users), with their assigned
parameters. Once a participant is identified in the database (according to the conference
ID), his/her parameters (as defined in the database) can be sent to the MCU in the same
response granting the participant the right to start a new ongoing conference. These
parameters are:
— Conference Name
— Conference Billing code
— Conference Password
— Chairperson Password
1200
1001
1300
On Going
Conference
with this ID?
Network
Numeric ID: 1000
Name: DefaultEQ
92
51000
92
51
00
0
MCU
IP Endpoint
IP Endpoint
MCU
Gatekeeper - 925 Prefix in
925DefaultEQ
IP Endpoint
New Conference
ID: 1300