Polycom RealPresence 2000 Скачать руководство пользователя страница 186

Страница: 186 / 1130

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide

4-40

Polycom, Inc.

Media Encryption

Encryption is available at the conference and participant levels, based on AES 128

(Advanced Encryption Standard) and is fully H.233/H.234 compliant and the Encryption

Key exchange DH 1024-bit (Diffie-Hellman) standards.

Media Encryption Guidelines

•

Encryption is not available in all countries and it is enabled in the MCU license. Contact

Polycom Support to enable it.

•

Media encryption is supported in CP, SVC Only and mixed CP and SVC Conferencing

Modes.

•

Endpoints must support both AES 128 encryption and DH 1024 key exchange

standards which are compliant with H.235 (H.323) to encrypt and to join an encrypted

conference.

•

The encryption mode of the endpoints is not automatically recognized, therefore the

encryption mode must be set for the conference or the participants (when defined).

•

Media Encryption

for

ISDN/PSTN

participants is implemented in RMX systems with

MPM+ and MPMx cards.

•

Conference level encryption must be set in the Profile, and cannot be changed once the

conference is running.

•

If an endpoint connected to an encrypted conference stops encrypting its media, it is

disconnected from the conference.

•

In Cascaded conferences, the link between the cascaded conferences must be encrypted

in order to encrypt the conferences.

•

Media Encryption

for

ISDN/PSTN (H.320)

participants is not supported in cascaded

conferences.

•

The recording link can be encrypted when recording from an encrypted conference to

the RSS that is set to encryption. For more information, see "

Recording Link Encryption”

on page

1-7

•

Encryption of SIP Media is supported using

SRTP

(

Secured Real-time Transport Protocol

)

and the

AES

key exchange method.

•

Encryption of SIP Media requires the encryption of SIP signaling - TLS Transport Layer

must be used.

•

Encryption of SIP Media is supported in conferences as follows:

—

All media channels are encrypted: video, audio and FECC.

—

Encryption of SIP Media is available only in MPM+ and MPMx Card

Configuration Modes.

—

RMX SRTP implementation complies with Microsoft SRTP implementation.

—

LPR is not supported with SRTP.

—

The

ENABLE_SIRENLPR_SIP_ENCRYPTION

System Flag

enables the

SirenLPR

audio algorithm when using encryption with the

SIP

protocol. The default value of

this flag is

meaning

SirenLPR

is disabled by default for

SIP

participants in an

encrypted conference. To enable

SirenLPR

the

System Flag

must be added to

system.cfg

and its value set to

YES

—

The

SEND_SRTP_MKI

System Flag

enables or disables the inclusion of the

MKI

field in

SRTP

packets sent by the RMX. The default value of the flag is

YES

Содержание RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды

Polycom RealPresence 2000, Руководство администратора

Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды