Polycom RealPresence 2000 Скачать руководство пользователя страница 292

Страница: 292 / 1130

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide

7-8

Polycom, Inc.

IVR Provider Entry Queue (Shared Number Dialing)

In an environment that includes a DMA, the RMX Entry Queue can be configured to

provide the IVR Services on behalf of the DMA to SIP endpoints. It displays the Welcome

Slide, plays the welcome message and retrieves the destination conference ID that is entered

by the participant using DTMF codes.
To enable this feature, a special Entry Queue that is defined as

IVR Service Provider only

created. This Entry Queue does not forward calls to conferences running on the RMX and its

main functionality is to provide IVR services.

Call Flow

The SIP participant dials the DMA Virtual Entry Queue number, for example

[email protected].
The DMA forwards the SIP call to the RMX, to a special Entry Queue that is configured as

IVR Service Provider Only

. The participant is prompted to enter the conference ID using

DTMF codes.
Once the participant enters the conference ID, the conference ID is forwarded to the DMA,

enabling the DMA to connect the SIP endpoint to the destination conference or create a new

conference and connect the participant to that conference.

Guidelines

•

An Entry Queue defined as IVR service provider only does not route the SIP call to a

target conference and it cannot be used to rout calls on the RMX. In such a

configuration, the DMA handles the calls

Therefore, normal Entry Queues must be

defined separately.

•

Operator Assistance

must be disabled in the IVR Service assigned to this Entry Queue.

•

Only the conference ID prompts should be configured. Other prompts are not

supported in

IVR Service Provider Only

configuration.

•

PSTN, ISDN, H.323 calls to this Entry Queue are rejected.

•

The DMA must be configured to locate the

IVR Service Provider Only

Entry Queue on

the RMX. To locate the Entry Queue the DMA requires the Entry Queue’s ID number

and the RMX Signaling IP address (xxx.xx.xxx.xx).

RMX Configuration

Entry Queue IVR Service

If required, create a special Entry Queue IVR Service in which the

Operator Assistance

option

is disabled and only the

Conference ID

prompts are enabled.

Содержание RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды

Polycom RealPresence 2000, Руководство администратора

Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды