Polycom RealPresence 2000, Руководство администратора

Страница: 749 / 1130

Chapter 22-System Configuration Flags
Polycom, Inc.
22-19
Manually Adding and Deleting System Flags
To add a flag:
1
In the System Flags dialog box, click the New Flag ( ) button.
The New Flag dialog box is displayed.
2
In the New Flag field enter the flag name.
3
In the Value field enter the flag value.
The following flags can be manually added to the
MCMS_PARAMETERS tab
:
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS
Flag Description
802_1X_CERTIFICATE_MO
DE Determines whether one TLS certificate is retrieved from the
Certificate Repository for all IP services or if multiple
certificates will be retrieved, one for each IP service. For more
information, see "
IEEE 802.1x Authentication” on page 23-42 .
Range: ONE_CERTIFICATE, MULTIPLE_CERTIFICATE
Default: ONE_CERTIFICATE.
802_1X_SKIP_CERTIFICAT
E_VALIDATION If the flag value is:
• YES - The retrieved certificate is not validated against theCA
certificate.
• NO - The retrieved certificate is validated against the CA
certificate. Validation failure raises an Active Alarm and is
reported in the Ethernet Monitoring dialog box.
For more information, see "
IEEE 802.1x Authentication” on
page 23-42 .
Range: YES, NO
Default: YES
802_FIPS_MODE If the flag value is YES, the availability of the MD5
Authentication Protocol will neither be displayed as selectable
option nor supported.
For more information, see "
IEEE 802.1x Authentication” on
page 23-42 .
Range: YES/NO.
Default: NO