Polycom RealPresence 2000, Руководство администратора

Страница: 629 / 1130

Chapter 20-RMX Manager Application
Polycom, Inc.
20-13
Adding MCUs to the MCUs List
The RMX Manager can connect to one or several RMX s simultaneously. If the site’s
configuration includes more than one MCU, or when a new MCU is added to your
configuration, and you want to monitor and control all MCUs from within the same
window, you must add the MCU to the MCUs list.
To add the MCU to the list of MCUs being managed, define the MCU’s connection
parameters.
To add a RMX unit:
1
On the MCUs toolbar, click the Add MCU button to add an MCU to the MCU list.
The Add MCU dialog box opens.
2
Define the following parameters:
The RMX must be installed and its IP addresses properly configured in the Management Network
Service before defining its connection parameters in the RMX Manager application.
Table 21 MCU Properties
Field Description
MCU Name Enter the name of the MCU on the network.
MCU IP Enter the IP address of the MCU’s Control Unit. The IP address must be
identical to the one configured in the MCU during first entry Configuration.
For more details, see the
Polycom® RealPresence Collaboration Server
(RMX) 1500/2000/4000 Getting Started Guide , " Procedure 1: First-time
Power-up” on page 2-8 .
Port Enter the number of the port used for communication and data
transactions between the
RMX unit and the RMX Manager.
For standard connection, enter 80 .
For a Secured connection (using TLS or SSL), enter 443 .
Username Enter the user name with which you will login to the MCU. A User with
this name must be defined in the
RMX Users list. The system is shipped
with a default User whose name is POLYCOM.