Polycom RealPresence 2000, Руководство администратора

Страница: 523 / 1130

Chapter 16-Network Services
Polycom, Inc.
16-69
The field definitions of the SIP Servers tab are the same as for the Default IP Network
Service . For more information see the RealPresence Collaboration Server (RMX) 1500/2000/
4000 Administrator’s Guide , " Click the SIP Servers tab.” on page 16-21 .
15 Click the Security tab.
The field definitions of the Security tab are the same as for the Default IP Network Service .
For more information see the RealPresence Collaboration Server (RMX) 1500/2000/4000
Administrator’s Guide , " Click the Security tab.” on page 16-24 .
16 Optional. To configure the ICE environment, click the SIP Advanced tab.
17 Modify the following fields:
18 Click the OK button.
The new Network Service is added to the IP Network Services list pane.
Setting a Network Service as Default
The default Network Service is used when no Network Service is selected for the following:
•
Dial out participants
• Reserving resources for participants when starting an ongoing conference
• Gateway calls
In addition, the Signaling Host IP address and the MCU Prefix in GK displayed on the RP
Collaboration Server Web Client main screen are taken from the default H.323 Network
Service.
One IP Network Service can be defined as default for H.323 connections and another
Network Service as default for SIP connections. If the IP Network Service supports both
H.323 and SIP connections, you can set the same Network Service as default for both H.323
and SIP, or for H.323-only or for SIP-only.
To designate an IP Network Service as the default IP Network Service:
1
In the Device Management pane, click IP Network Services ( ) .
2 In the Network Services list pane right-click the IP Network Service to be set as the
default, and then click Set As H.323 Default, or Set As SIP Default .
The next time you access this menu, a check mark is added next to the network service
type to indicate its selection as default.
To set this IP Network Service for both H.323 and SIP connections, repeat step 2 and
select the option you need.
The following icons are used to indicate the default IP Network Service type:
Table 16-38 Default IP Network Service – SIP Advanced
Field Description
Server User Name Enter the User name for this service as defined in the Active
Directory . For example, enter rmxNet2 .
This field is disabled if the ICE Environment field is set to None .
ICE Environment Select MS (for Microsoft ICE implementation) to enable the ICE
integration.
This field is disabled if the RMX is not running in
MPM+ Card
Configuration Mode .