Polycom RealPresence 2000 Скачать руководство пользователя страница 574

Страница: 574 / 1130

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide

17-40

Polycom, Inc.

For more information, see "

Using External IVR Services via the MCCF-IVR Package”

page

7-9

IVR Services Support with TIP Protocol

From Version 8.1, Conference IVR and Entry Queue IVR Services are supported with AVC

TIP protocol in conferences that include both TIP-enabled and non-TIP-enabled endpoints.

TIP-enabled endpoints can be moved from the Entry Queue to the destination conference if

the

TIP Co mpatibility Modes

settings in the Profile are identical for both conferencing entities

(it is recommended to use the same

Profile

for both entities).

The IVR services can be enabled for all

TIP Compatibility Modes:

•

Video only

•

Video and Content

•

Prefer TIP

IVR media files, WAV for voice messages and JPG for video slides, are all stored on the

RealPresence Collaboration Server (RMX).

Guidelines

•

AVC SIP and TIP protocols are supported on the RealPresence Collaboration Server

1500/2000/4000 only.

•

IVR default audio files are enabled for all

TIP Compatibility Modes.

•

Only Polycom default

Welcome

slides are available. Custom

Welcome

slides are not

supported.

•

TIP-enabled endpoints can send DTMF digits to MCU.

•

In an mixed TIP environment, there is no support for content in cascaded conferences.

Additionally, Legacy and Lync endpoints cannot view content.

For more information, see

Default IVR Prompts and Messages

The system is shipped with the following audio prompts and messages:

Table 17-14

Default IVR Messages

Message Type

Message Text

When Played

File Name

General Welcome
Message

“Welcome to unified conferencing.”

The participant
enters the
conference IVR
queue

General_Welcome.wav

Chairperson
Identifier Request

“For conference Chairperson Services,
Press the Pound Key. All other
participants please wait...”

The participant is
asked to self-
identify as the
chairperson

Chairperson_ Identifier.wav

Содержание RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды

Polycom RealPresence 2000, Руководство администратора

Результаты поиска

Содержание RealPresence 2000

Отзывы:

Похожие инструкции для RealPresence 2000

Бренды по названию

Популярные бренды