Polycom RealPresence 2000, Руководство администратора

Страница: 108 / 1130

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
2-72
Polycom, Inc.
enabled by assigning a conference Profile in which registration is configured for the
required conferencing entities. Assigning a conference Profile in which registration is
not configure for conferencing entities will prevent them from registering. By default,
Registration is disabled in the Conference Profile, and must be enabled in Profiles
assigned to conferencing entities that require registration.
14 Define the following parameters:
15 Click OK to complete the Profile definition.
A new Profile is created and added to the Conference Profiles list.
Defining Mixed CP and SVC Conferencing Profiles
The mixed CP and SVC Profile is based on the CP Profile with a few of the CP options
disabled for compatibility between AVC and SVC and to enable the media conversion
between these two modes.
To configure a mixed AVC and SVC conference:
1 In the RMX Management pane, click Conference Profiles .
Table 2-32 New SVC Profile - Network Services Parameters
Parameter Description
IP Network Services:
Service Name This column lists all the defined Network Services, one or several
depending on the system configuration.
SIP Registration To register the conferencing entity to which this profile is assigned
with the SIP Server of the selected
Network Service , click the check
box of that Network Service in this column.
When SIP registration is not enabled in the conference profile, the
RMX's registering to SIP Servers will each register with an URL
derived from its own signaling address. This unique URL replaces the
non-unique URL, dummy_tester, used in previous versions.
Accept Calls To prevent dial in participants from connecting to a conferencing
entity when connecting via a
Network Service , clear the check box of
the Network Service from which calls cannot connect to the
conference.
Although SVC Conferencing Mode options are available in Conference Profiles , it is advised that
they not be used with Version 8.1.4.J .