Perkins 1106C Series, Разборка и сборка, Страница: 85 / 192

KENR6932 85
Disassembly and Assembly Section
g01337777
Illustration 151
1. Install Tooling (A) into one of the unused threads
in the assembly of the crankshaft pulley, the
vibration damper and the crankshaft adapter.
2. Remove bolts (4).
3. Remove vibration damper (3) and crankshaft
pulley (2) from crankshaft adapter (1). Remove
Tooling (A) from crankshaft adapter (1).
4. Use a suitable tool in order to prevent the
crankshaft from rotating. Use Tooling (B) to
remove torx screws (5).
5. Hold a wood block against crankshaft adapter (1).
Strike the wood block with a hammer in order to
loosen split lock rings (9).
6. Carefully remove crankshaft adapter (1) from
the crankshaft. Remove thrust block (6) from
crankshaft adapter (1). Remove O-ring seal (7)
from thrust block (6). Remove split lock rings (9)
and spacer (8) from crankshaft adapter (1). Note
the position and orientation of the split lock rings
and the spacer.
i02654371
Vibration Damper and Pulley -
Install
(Pulleys without Split Lock
Rings)
Installation Procedure
Table 33
Required Tools
Tool
Part
Number Part Description Qty
A
-
Guide Stud
(M12 by 70 mm)
1
B
27610299
E18 Torx socket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
g01337793
Illustration 152
1. Ensure that the crankshaft adapter and the front
of the crankshaft are clean and free from damage.
Install crankshaft adapter (1) to the crankshaft.
2. Install torx screws (3) to crankshaft adapter (1).
3. Use a suitable tool in order to prevent the
crankshaft from rotating. Use Tooling (B) to tighten
the torx screws to a torque of 200 N·m (147 lb ft).