Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 437 / 478

R-103
A Standard System Protocol
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
R-
5 3
Z
4
L
Lase
r
Mi
cr
omet
er
Pr
otoc
o
l
Re
f
R
-5-3
Protocol
Configur
ation
This sequence uses the average move and high-speed data output as the averaging method and sets
the averaging times per measurement interval 4.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Additional Information
This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not
turned ON.
This sequence uses the average move and low-speed data output as the averaging method and sets
the averaging times per measurement interval 4.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Additional Information
• This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not
turned ON.
• This sequence will be processed the same as sequence No. 425 AVG move (H) times set for
5000-series Laser Micrometers.
AVG Move (H) Times Set (3000-series, High-speed Type)
(Sequence No. 425 (Hex 01A9))
Offset Contents (data format) Data
+0 Number of send data words (4 digits Hex) 0002 (fixed)
+1 Number of averaging times (4 digits BCD) 16 to 2048
(32 to 2048 for 5000/6000 Series)
AVG Move (L) Times Set (3000-series, High-speed Type)
(Sequence No. 426 (Hex 01AA))
Offset Contents (data format) Data
+0 Number of send data words (4 digits Hex) 0002 (fixed)
+1 Number of averaging times (4 digits BCD) 32 to 2048
First word of send
data Number of send data words +0
+1 Number of averaging times
First word of send
data Number of send data words +0
+1
Number of averaging times