Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 418 / 478

A Standard System Protocol
R-84
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
422 (01A6) Memory switch set 2
(3000-series) Sets memory switches. Yes No
423 (01A7) Simple AVG times set
(3000-series) Taking the simple average as the averag-
ing method, sets the averaging times per
measurement interval 4. Yes No
424 (01A8) AVG move interval set
(3000-series) Taking the average move as the averag-
ing method, sets the measurement inter-
val number. Yes No
425 (01A9) AVG move (H) times set
(3000-series) Taking the average move and high-speed
data output as the averaging method,
sets the averaging times per measure-
ment interval 4. Yes No
426 (01AA) AVG move (L) times set
(3000-series) Taking the average move and low-speed
data output as the averaging method,
sets the averaging times per measure-
ment interval 4. Yes No
427 (01AB) Automatic detection set
(3000-series) Sets work automatic detection function. Yes No
428 (01AC) Automatic detection release
(3000-series) Releases the settings of work automatic
detection function. No No
429 (01AD) Automatic detection list request
(3000-series) Requests the settings of work automatic
detection function. No Yes
430 (01AE) 3Z4L initialize (3000-series) Clears the 3Z4L, sets the mm unit, sets
the memory switches, does not pro-
cesses statistics, and clears all statistic
memory in sequence. Yes No
431 (01AF) Measurement condition set
(4000-series) Sets measurement conditions. Yes No
432 (01B0) Measurement condition release
(4000-series) Releases measurement conditions that
have been set. Yes No
433 (01B1) Measurement condition list
request (4000-series) Requests the measurement conditions
that have been set and other settings. No Yes
434 (01B2) Single run measurement start
(4000-series) When the sample measurement condi-
tion is from 1 to 999, performs a single
run measurement and requests the mea-
surement results. No Yes
435 (01B3) Deflection measurement start
(4000-series) Starts a deflection measurement. No No
436 (01B4) Continuous measurement start
(scan) (4000-series) Starts a continuous measurement. The
scan notification method is used for
receive data.
No Yes
437 (01B5) Continuous measurement start
(interrupt (*2)) (4000-series) Starts a continuous measurement. The
interrupt notification method is used for
receive data. No Yes
438 (01B6) Measurement termination
(4000-series) Terminates continuous measurement. No No (*1)
439 (01B7) Data request (4000-series) Requests measurement data in the idle
measurement status or the latch data
generated by the measurement com-
mand. No Yes
440 (01B8) Forced positive zero
(4000-series) Sets the forced zero direction to positive
(+). No No
441 (01B9) Forced negative zero
(4000-series) Sets the forced zero direction to negative
(–). No No
Sequence
No.
Communications sequence
name
Function Ladder interface
Send word
allocation
Receive
word alloca-
tion