Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 420 / 478

A Standard System Protocol
R-86
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
This sequence resets errors, data, analog output, and decision result, and puts the Laser Micrometer
into standby.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
This sequence sets memory switches and the area for the work position LED.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
This sequence sets the display unit to mm.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Additional Information
This sequence can be used for the 3Z4L-4000 Series only when pin 8 on DIP switch SW2 is
turned ON.
3Z4L Clear (Sequence No. 400 (Hex 0190))
Memory Switch Set (Sequence No. 401 (Hex 0191))
Offset
Contents
(data format)
Data
3000-series 4000-series
+0 Number of send data
words (4 digits Hex) 0003 (fixed) 0003 (fixed)
+1 w (1 digit BCD) Using buzzer sound: 0 to 3 Number of digits for extinguishing
indicator: 0 to 2
x (1 digit BCD) Automatic latch release time: 0 to
9 I/O IF RUN Input: 0 or 1
y (1 digit BCD) Using print timer, the setting for
simultaneous measurement: 0 to
3 (high-speed), 0 to 1 (other) Display of Err–0: 0 or 1
z (1 digit BCD) Display of the comma for
1/1000s digit, number of
display digits: 0 to 5 (high-speed),
0 to 3 (other) Averaging method: 0 to 2 (high-
speed), 0 (other)
+2 v (1 digit BCD) Measurement interval 4: 0 to 6 Use of comma: 0 or 1
mm Unit Set (Sequence No. 402 (Hex 0192))
First word of send
data Number of send data words
+0
+1
+2
W
(Undefined)
X Y Z
V