Omron CJ1W-SCU22, Руководство по эксплуатации, Страница: 204 / 478

5 Serial Gateway
5-12
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
5-3 Using the Serial Gateway
Use of the Serial Gateway basically only requires setting of the device variables for CJ-series Unit for
System Settings and Software Switches.
Set the device variables for CJ-series Unit for System Settings shown below.
5-3-1 Setting Device Variable for CJ-series Unit for System Settings
and Software Switches
Using Serial Gateway Alone
Device variable for CJ-series Unit
Type R/W Name Function
Port 1 Port 2
*_P1_PortCfg *_P2_PortCfg WORD RW Port Settings Serial communications
mode (bits 11 to 08):
9 hex: (Serial Gateway
Mode)
Bits 00 to 04: Set the
serial communications
conditions to match the
protocol at the conversion
destination.
*_P1_BaudrateCfg *_P2_BaudrateCfg USINT RW Baud Rate
(unit: bps) Baud rate: Set to match
the protocol at the conver-
sion destination.
*_P1_SendDelayCfg *_P2_SendDelayCfg WORD RW Send Delay
Settings Bit 15: Send delay time
Bits 00 to 14: Send delay
(user-specified)
*_P1_HlkCTSCtlCfg *_P2_HlkCTSCtlCfg BOOL RW CTS Control FALSE: No
TRUE: Yes
*_P1_PmrSgwRespTimeo
utCfg *_P2_PmrSgwRespTimeo
utCfg USINT RW Serial Gateway
Response Tim-
eout Monitor-
ing Time 0: 5 s (default)
Data range: 1 to 255
0.1 to 25.5 s [Unit: 100
ms]