![background image](http://html.mh-extra.com/html/nec/n8405-019/n8405-019_user-manual_248016309.webp)
-
289
-
NOTES:
In the above example, the local KVM is connected to the CPU blade
in slot 4, and the local DVD and the local USB port are connected to
the CPU blade in slot 8.
At power-on of the Blade Enclosure (initial state), the slot 1 is
selected for KVM/DVD.
Selecting "E" in [DVD Select] field allows EM card to use
DVD/USB. Select "E" when updating EM firmware or collecting
EM log. Note however, while "E" is selected, DVD/USB will be
disabled for all CPU blades.
IMPORTANT:
If the EM card is not connected correctly or does not operate
normally, the protection feature may work to disable connection of
KVM and DVD/USB. When KVM or DVD/USB is not available
though the correct CPU blade has been selected, check if the EM
card operates normally.
If you select DVD/USB while the CPU blade is working with
DVD/USB devices, a malfunction may occur. Select DVD/USB
after the CPU blade finishes its operation (by performing Safely
Remove DVD/USB Device).
Do not connect or disconnect the KVM or DVD/USB while the
CPU blade is being activated. Otherwise, the CPU blade may fail to
start.
Press [
] or [
] button to increase or decrease the number at the cursor position in the range
between 1 and 8.
Press [
] or [
] button to move cursor horizontally to switch selection between KVM and DVD.
Press the [Enter] button to determine the setting you have made, and to return to the Main Menu.
Press the [Menu] button to return to the Main Menu without changing the setting.
Содержание N8405-019
