NEC N8405-019, Руководство пользователя

Страница: 79 / 384

- 59 -

CFG_MAXPOW_SET
Specify the maximum power consumption desired to be used for the maximum power
consumption management in the power management provided by the EM card. When this
item is set to "0," the EM card calculates the value used for the maximum power
consumption management based on the unit and UPS configurations and their states.
<Max Power>: Maximum power consumption specified [W]
The default setting is "0."

CFG_ACINPUT_WAIT
With the power redundancy mode set to the N+N redundant mode in the power
management provided by the EM card, the system waits until proper power is supplied to
each of the two AC line groups. The item indicates the waiting time in seconds.
<Input waiting time>: Input power waiting time at start [sec]
The default setting is "3" seconds.

CFG_SVB_SHUTDOWN_TIMEOUT
When the EM card provides UPS management, the EM card can direct CPU blades to shut
down at occurrence of interruption of input power to UPSs. The item indicates the time
for which the EM card waits until the shutdown is completed.
<Shutdown time> : Timeout period after execution of blade shutdown [sec]
The default setting is "300" seconds.
 CFG_SVB_BOOT_TIMEOUT
When the EM card provides UPS management, the EM card can direct CPU blades to
power on at recovery of input power to UPS. The item indicates the time for which the
EM card waits until the power-on is completed. (unit: sec)
The default setting is "400 seconds".

CFG_SVB_SHUTDOWN_TIMEOUT_FOR_BIUPS
When the EM card provides UPS management for built-in UPS, the EM card can direct
CPU blades to shutdown when the power required for system operation cannot be secured
due to power failure.
The built-in UPS stops output power when:
–
Shutdown of all the CPU blades completes
–
Shutdown time specified in this parameter (unit: sec) has passed
The default setting is "300" seconds.