NEC N8405-019, Руководство пользователя, Страница: 268 / 384

- 248 -
Enter UPS Delay Time in the “Power Off Delay” and click the “Apply” button.
If there are multiple Outlet Groups, do the same configuration for all Outlet Groups.
Name and number of Outlet Groups vary depending on the UPS model. Refer to the
Users Guide of the UPS for details.

Boot Blades after UPS recovery
Specify whether to use the feature to reboot the CPU blade that has been shutdown by EM
card due to input power lost to UPS, when the input power is recovered. The default
setting is "Disable".
NOTE:
Even if the input power is recovered before the UPS enters
into sleep state after the sleep command is issued to UPS, CPU blade
does not reboot until the UPS actually enters into sleep state.
UPS enters into sleep state for several seconds because of the command
that was issued.
If the sleep command is issued to several UPSs, the CPU blade reboots
after all the UPSs exit from the sleep state.