NEC N8405-019, Руководство пользователя

Страница: 334 / 384

- 314 -
Diagnosis
FAN
This menu is used to diagnose the system fan unit.
When you select [7: Diagnosis] on Main Menu, the submenu as shown below appears.
Diagnosis Sub
1:FAN
When you select [1: FAN], the confirmation screen as shown below appears.
Diag FAN OK?
Y/N
Press [

] or [

] button to move cursor horizontally to switch selection between "Y" and "N".
To cancel diagnosis, put the cursor on "N" and press the [Enter] button. The screen goes back to
[Diagnosis Sub] menu without any operation.
To execute diagnosis, put the cursor on "Y" and press the [Enter] button.
The following screen is displayed while diagnosis is being executed.
Diagnosing FAN
>
During diagnosis, the prompt ">" moves along with the progress of diagnosis.
Diagnosing FAN
>
If the diagnosis process is already activated, the following message is displayed.
Already Running
If any error occurs due to some reason, the error message as shown below appears.
Error xxxx
Upon completion of diagnosis, the message as shown below appears.
OK

OK: All fan units work normally.
 Timeout Error: The diagnosis timed out.
 Error xxxx: An error other than above was detected.