NEC N8405-019, Руководство пользователя, Страница: 211 / 384

- 191 -
NOTES:
 By clicking the [Reset] button, values in this page will be returned
to the value before any changes have been made.

If you set secondary target device, specify the same value as
primary target device for [iSCSI Name] in [Initiator Configuration].
For the devices marked with (*1), the following parameters can be
specified for 2nd Target.
– IP Address in Initiator Configuration
– Subnet Mask in Initiator Configuration
– Gateway in Initiator Configuration
– Primary DNS in Initiator Configuration
– Secondary DNS in Initiator Configuration
– IP Address in Target Configuration (only when MPIO Mode is
set to Disabled)
– TCP Port in Target Configuration (only when MPIO Mode is set
to Disabled)
– iSCSI Name in Target Configuration (only when MPIO Mode is
set to Disabled)
For the other parameters, the same values as primary target device are
used.
NOTES:
For the features marked with (*1), they can be applied to the following
devices.

CPU Blade
CPU Blades listed below does not support this feature:
120Bb-6, 120Bb-m6, 120Bb-d6, 140Ba-10, B140a-T, B120a,
B120a-d, B120b-Lw, B120b, B120b-d, B120b-h

Riser Card
Riser cards listed below support this feature:
N8403-062(F), N8403-063(F), N8403-064(F), N8403-081(F),
N8403-082(F), N8403-083(F)

Option cards for additional slot (I/O card)
Option cards listed below support this feature:
N8403-049(F), N8403-051(F), N8403-065(F), N8403-067(F),
N8403-084(F), N8403-085(F)
Features marked with (*2) has no effect if UEFI is selected for the Boot
Mode.