NEC ElectraElite IPK, Руководство по программированию

Страница: 618 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 541
___________________________________________________________________________________
___________________________________________________________________________________
4-32 Trunk Digit Restriction
General Description
Use this Memory Block to specify per port the maximum number of digits that can be
dialed on any outside line.
Display
Related Programming.
Refer to Chapter 3 Advanced Applications .
Notes
Programming Procedures
1 Go off-line.
2 Press LK4 +
CB
to access the Memory Block.
3 Use the dial pad to change Setting Data for CO/PBX No.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
B
+
A
to enter A for Port Numbers 100~109
B
+
B
to enter B for Port Numbers 110~119
B
+
C
to enter C for Port Number 120
Default Values
00 (No Limit)
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
1. Code Restriction must be assigned before this feature is used.
2. Trunk Digit Restriction applies to all CO/PBX lines.
3. Tie Line Code Restriction must be assigned before this feature works on Tie lines.
4. Telephone ports A0~C0 are ports 100~120.
Telephone Mode
4
Submode
—
Data No.
32
PC Programming
¦
+BTT
Data
No.
0 1 / 3 2 : D G R E S T = 0 0
T I M E D I S P L A Y
Tel
Port
No.
(01 ~ C0)
Title
Setting
Data
(00~99)