NEC ElectraElite IPK, Руководство по программированию

Страница: 443 / 803

2 - 366 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-15-16 Centralized BLF Send Extension
Number Assignment
General Description
Use this Memory Block to assign the Extension Numbers for sending Centralized BLF
messages.
R1500 or higher is required.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Send Group
1
Send Group
2
Send Group
3
Send Group
4
Send Group
5
Send Group
6
Send Group
7
Send Group
8
Programming Procedures
1 Go off-line.
2 Press LK1 + LK15 +
AF
to access the Memory Block.
3 Use dial pad keys to enter Table number and Extension No.
Use the following to enter data:
J
to move cursor left
L
to move cursor right
K
~
I
to enter numeric data
Three Digit Extension Number: 100~899
Four Digit Extension Number: 1000~8999
Tables 001~120 can be assigned.
Default Values:
All Tables Not Specified
4 Press corresponding CO/PBX line key to select the Send Group No.
5 Press
G
to write the data, and display the next Memory Block.
6 Repeat Steps 4 and 5 for each Send Group No.
7 Program the next Memory Block or press
E
to go back on-line.
System Mode
1
Submode
15
Data No.
16
PC Programming
¦
+AW
1 5 : S E N D 0 0 1 =
T I M E D I S P L A Y
Data
No.
Table
No.
(001~120
Title
Extension
Number