NEC ElectraElite IPK, Руководство по программированию

Страница: 552 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 475
___________________________________________________________________________________
___________________________________________________________________________________
3-44 Caller ID Display Assignment for CO/
PBX Line
General Description
Use this Memory Block to assign one Multiline Terminal to display ANI/Caller ID
Indication for incoming CO/PBX calls per CO/PBX line.
This Memory Block is used for R1600 and lower. For R1700 or higher, it is no longer
required.
Display
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
Programming Procedures
1 Go off-line.
2 Press LK3 +
G
+
DD
to access the Memory Block.
3 Enter data for CO/PBX No. using the dial pad to assign ANI/Caller ID to a station.
Use the following to enter data:
J
to moves the cursor left
L
to moves the cursor right
K
~
I
to enter numeric data or CO/PBX No.
– OR –
D
to go to the next assigned CO/PBX Line No.
Enter the following:
Tel Port No. 01~CO
CO/PBX No. 01~64
Default Values
No Assignment
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
CO/PBX Line Mode
3
Submode
—
Data No.
44
PC Programming
¦
+AI
0 1 / 4 4 : C A L L I D
T I M E D I S P L A Y
CO/PBX
No.
(01~64)
Data
No.
Tel
Port No.
01~C0
Title