NEC ElectraElite IPK, Руководство по программированию

Страница: 625 / 803

2 - 548 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
.
Notes
3 Press the Line Key corresponding to ringing required for Tel Port No.
The LED indication changes to indicate data each time a CO/PBX Line Key is
pressed.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
C
to go to the next page
A
to go to the previous page
B
+
A
to enter A for Port Numbers 100~109
B
+
B
to enter B for Port Numbers 110~119
B
+
C
to enter C for Port Number 120
Default Values
All Telephones: No Ring
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-2-26 Delayed Ringing Time Assignment (ICM)
4-12 Line Key Selection for Telephone Mode
1. When Immediate Ring is set, the LED is green.
2. This Memory Block applies only when an SIE or Call Arrival key is programmed for line key appearance.
3. Telephone ports A0~C0 are ports 100~120.
Programming Procedures
CO/PBX
Line Key LED
Off Green Red
Data No ring
Immediate
Ring
Delayed
Ring
The shaded
selection is the
default.