NEC ElectraElite IPK, Руководство по программированию

Страница: 420 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 343
___________________________________________________________________________________
___________________________________________________________________________________
1-15-05 Destination Point Code Transfer
Assignment
General Description
Use this Memory Block to assign the Destination Point Code to the associated
Common Signaling Channel when K-CCIS commands are required to pass through a
tandem system. This Memory Block is used for Centralized K-CCIS features.
With R1500 or higher, a CCH Channel i can be assigned for K-CCIS over IP.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK15 +
KE
to access the Memory Block.
3 Use dial pad keys to enter Setting Data.
Press 1 to assign i for K-CCIS over IP for R1500 or higher.
Use the following to enter data:
J
to move cursor left
L
to move cursor right
K
~
I
to enter numeric data
Point Code Range is 00001~16367.
T001~T255 can be assigned.
Default Values:
Blank
4 Press
G
to write the data.
5 Press
E
to go back on-line.
System Mode
1
Submode
15
Data No.
05
PC Programming
¦
+AW
0 5 : T 0 0 1 : = 0
T I M E D I S P L A Y
Point
Code
Data
No.
C-Channel
1~4, i
Table
(001~ 255)