NEC ElectraElite IPK, Руководство по программированию

Страница: 49 / 803

1 - 16 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
63 Hold Recall Time Selection
(Exclusive) 1.0 (R2500 or lower)
060s (R3000 or
higher) In minutes: 0.5, 1.0, 1.5, 2.0, 3.0,
5.0, 8.0,
∞ (
No Limit) (R2500 or lower)
000s (No Limit), 001s~999s (R3000 or
higher)
65 Code Restriction Class Allow/Deny
Selection Class 01 ~ 04 – YS
Class 05 ~ 14 – NO YS (Allow)
NO (Deny)
66 8-Digit Matching Table to Normal
Dial Assignment Tables 00 ~ 14 =
Used
(All CO/PBX Line
LEDs On)
Table 15 = Unused
(CO/PBX Line LED
Off) N/A
67 OCC Table Assignment Tables 00 ~ 15 =
Blank
Table 16 =
1010XXX N/A
68 8-Digit Matching Table to OCC
Table Assignment CO/PBX Line LED
Off Refer to 1-1-68 8-Digit Matching Table
to OCC Table Assignment on page
2-88
.
69 Tie Line Code Restriction
Assignment YS NO = No Restriction
YS = Restriction
70 Code Restriction Class Assignment
when Lockout is Set 15 Class 00 ~ 15
71 First Delay Announcement Start
Time Selection 20 In seconds: 00, 10, 20, 30, 40, 50, 60
72 First Delay Announcement Repeat
Selection 1 1, 2, 3, 4, 5, 6, 7, 8
73 First to Second Delay
Announcement Interval Time
Selection 20 In seconds: 00, 10, 20, 30, 40, 50, 60,
∞ (
No Limit)
74 Second Delay Announcement
Repeat Selection 1 1~ 8
75 Second Delay Announcement
Repeat Interval Time Selection 20 In seconds: 00, 10, 20, 30, 40, 50, 60,
∞ (
No Limit)
76 Barge-In Alert Tone Assignment YS YS = Send Alert Tone
NO = Do not send Alert Tone
LK 1 System Mode
LK 1 CO Line (Continued)
Data
No.
Memory Block Name Default Value Programming Values