NEC ElectraElite IPK, Руководство по программированию

Страница: 783 / 803

3 - 60 Advanced Applications
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
H
Port 8
Ethernet Switch that has IEEE 802.1q/p support enabled and is configured
to carry traffic for both VLAN 100 and VLAN 200.
H
Port 1
In IP terminal programming, the IP terminal is configured for priority 5, and
the PC is configured for priority 0.
H
Port 2
Not Used.
H
Port 3
The PC does not support VLAN tagging, so port-based priority could be
used.
H
Port 4
Traffic from the MG(8) is set for High Priority queue in MB 1-16-06.
H
Port 5
In IP terminal programming, the IP terminal is configured for priority 5.
H
Port 6
Traffic from the IPC is set for High Priority queue in MB 1-16-06.
H
Port 7
In IP terminal programming, the IP terminal is configured for priority 5.
Figure 3-5 Port Priority Settings
Depicts Memory Blocks
Settings:
1-16-06 Port Based
Priority Selection
1-16-07 High Priority
RX Tag
1-16-08 High Priority
TX Tag
1-16-09 Low Priority TX
Tag