NEC ElectraElite IPK, Руководство по программированию

Страница: 92 / 803

Electra Elite IPK Document Revision 4
Programming Manual 2 - 15
___________________________________________________________________________________
___________________________________________________________________________________
Notes
1. To speak to station user A, station user D dials extension 100.
2. In the example at station A:
The ICM LED blinks, and a ring tone that is different from the normal ringing tone is heard.
The call can be answered by lifting the handset.
Stations B and C users cannot press the line key on the Multiline Terminals to answer the call.
3. In the example, when station user A does not answer in the specified time:
The ringing tone changes to the normal tone and station C starts ringing.
Any station (A, B, or C) user can press the flashing line key to answer the call.
4. After the timeout, the system uses the Day and Night Ringing Assignment and rings the assigned station.
5. Select
∞
(No Limit) to disable this feature.
6. Telephone ports 1 and 2 are in Station to Timer Class of Service, Class 1 by default. All other ports are in Station
to Timer Class of Service, Class 2 by default (R3000 or higher)
.
7. When a system is upgraded from R2500 or lower, the Start Time Selection is reset to the default value during
the upgrade process (R3000 or higher)
.
Example:
(D)
Electra Elite
IPK System II
(A) 100
(B) 101
(C) 102
(C) 102
(B) 101
(A) 100
Time Elapsed
System 1 System 2
In this example, systems 1 and 2 are connected. Stations A (extension 100)
and C (extension 102) are assigned to ring on the Tie line using Memory
Blocks 4-01 and 4-02 [CO/PBX Ring Assignment (Day/Night) Mode].
Electra Elite
System I
Electra Elite
Elite IPK
System I