NEC ElectraElite IPK, Руководство по программированию

Страница: 597 / 803

2 - 520 Memory Blocks
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-13 CO/PBX Busy Forward Station
Assignment
General Description
Use this Memory Block to specify up to two telephones to ring when a CO/PBX call
terminates at a busy station.
Display
Notes
Programming Procedures
1 Go off-line.
2 Press LK4 +
AC
to access the Memory Block.
3 Use dial pad to change data.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
B
+
A
to enter A for Port Numbers 100~109.
B
+
B
to enter B for Port Numbers 110~119
B
+
C
to enter C for Port Number 120
Setting Data: Port No. 01
~
96
Default Values
Not specified
4 Press
G
to write the data and display Forward No. 2.
5 Enter second transfer Port No.
6 Press
G
to write the data and display the next Memory Block.
7 Program the next Memory Block or press
E
to go back on-line.
1. When the Multiline Terminal where the forward is initially set (Forward 1) is busy, the call is forwarded to a
second specified station (Forward 2).
2. When all three stations are busy, the first station rings.
3. Telephone ports A0~C0 are ports 100~120.
Telephone Mode
4
Submode
—
Data No.
13
PC Programming
¦
+BTT
0 1 / 1 3 : F W D 1 =
T I M E D I S P L A Y
Data
No. Title
Tel
Port
No.
(01~C0)
Forward
No.
1/2
Setting
Data