NEC ElectraElite IPK, Руководство по программированию

Страница: 399 / 803

2 - 322 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-14-03 ARS Route Table Number Assignment
General Description
Use this Memory Block to assign each ARS Dialing Assignment to an ARS Route
Assignment.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK14 +
KC
to access the Memory Block.
3 Use dial pad keys to select Table number (1~4), Dial number (01~C8), and Route number (01~32).
Use the following to enter data:
K
~
I
to select data
J
to move cursor left
L
to move cursor right
4 Press
G
to write the data. The next Dial No. is displayed.
5 Repeat Steps 3 and 4 for each Dial No (01~C8) for Table 1. After Dial No. C8 is programmed, the next table No. is displayed.
6 Repeat Programming cycle for dial Nos. 01~C8 for each Table (1~4). The next Memory Block is displayed.
7 Program the next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
3-03 Trunk-to-Trunk Group Assignment
4-40 LCR Class Selection
1-1-30 Route Advance Block Assignment
1-8-08 Class of Service (Station) Feature Selection 2
1-14-00 ARS Allow/Deny Selection
1-14-01 ARS Dialing Assignment
1-14-02 ARS Dial Allow/Deny Selection
1-14-04 ARS Trunk Group to Route Number Assignment
1-14-05 ARS Digit Delete Assignment
System Mode
1
Submode
14
Data No.
03
PC Programming
¦
+AB
0 3 : 1 / 0 1 R O U T E 0 0
T I M E D I S P L A Y
Table
1~4
Setting
Data
Data
No.
Dial
No.
Title