NEC ElectraElite IPK, Руководство по программированию

Страница: 68 / 803

Electra Elite IPK Document Revision 4
Programming Manual 1 - 35
___________________________________________________________________________________
___________________________________________________________________________________
19 Tie Line/CO/PBX Incoming Signal
Detect Time Selection 03 Refer to 3-19 Tie Line/CO/PBX
Incoming Signal Detect Time Selection
on page 2-444
.
20 Tie Line Loop Off-Guard Time
Selection 2.0 In seconds:
0.0, 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0,
7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0
21 Tie Line Length of Wink Signal
Selection 180 In milliseconds:
30, 60, 90, 120, 150, 180, 210, 240,
270,
300, 330, 360, 390, 420, 450, 480
22 Tie Line Length of Delay Signal
Selection 300 In milliseconds:
0, 300, 600, 900, 1200, 1500, 1800,
2100, 2400, 2700, 3000, 3300, 3600,
3900, 4200, 4500
24 Tie Line Incoming Interdigit Timeout
Selection 6s 1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s, 10s,
11s, 12s, 13s, 14s, 15s,
∞ (
No Limit)
25 Tie Line Wink/Delay Signal Detect
Timeout Selection 7s 1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s, 10s,
11s, 12s, 13s, 14s, 15s,
∞ (
No Limit)
27 Tie Line Dial Tone Selection YS YS, NO
28 Tie Line Reorder Tone Selection YS YS (Send)
NO (Do Not Send)
29 Trunk Internal Transmit Pad
Selection 8 In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
30 Trunk Internal Receive Pad
Selection 8 In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
31 Trunk External Transmit Pad
Selection 0 In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
32 Trunk External Receive Pad
Selection 0 In dB:
2, 4, 6, 8, 12, 16, 3, -3, 0
33 Disconnect Recognition Time
Selection 0.3 In seconds:
0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8,
0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5
38 Automated Attendant Message to
Trunk Selection 1 Message 1~8 to CO 01~64
LK 3 CO/PBX Line Mode (Continued)
Data
No.
Memory Block Name Default Value Programming Values