Motortech MIC-Marine, Руководство по эксплуатации

Страница: 20 / 176

4 Product Description
20 Rev. 09/2019
4.1.2 Mechanical Data
The MIC6 has the following mechanical characteristics.
Feature Value
Dimensions 391 mm x 240 mm x 114 mm (15.39" x 9.45" x 4.48")
(length x width x height) including connectors
MIC6-Marine :
Width x height including wire rope dampers:
311 mm x 149 mm (12.22" x 5.85")
Weight 6 kg (13.2 lbs)
Shape of device See chapter Overview Drawings on page 27
Mechanical environmental
conditions The housing is resistant to general atmospheric
contaminations.
Resistant to gas engine lubricants.
Protection class: I
Protection: IP 69
The specified protection classes and types are only
guaranteed if all external wiring connections are made in
accordance with the connector specification, all covers and
seals are installed as intended and the following tightening
torques are observed:
– All M4 bolts: 0.8 Nm to 1 Nm (0.6 lb-ft to 0.7 lb-ft)
– Service screw: 2.5 Nm to 3 Nm (1.9 lb-ft to 2.2 lb-ft)
Always use a new seal when installing the service cover.
Climatic environmental
conditions Housing surface temperature:
–40 °C to +60 °C (–40 °F to +140 °F)
Max. 95 % humidity without condensation
up to 3,000 m (9,842') above sea level
Permissible vibration
conditions MIC6-Marine :
– 2 Hz to 25 Hz with a maximum vibration displacement of
1.6 mm (0.06")
– 25 Hz to 1,000 Hz with a constant acceleration of 4g
MIC6 :
– 2 Hz to 12.4 Hz with a maximum vibration displacement
of 1.6 mm (0.06")
– 12.4 Hz to 1,000 Hz with a constant acceleration of 1g