Motortech MIC-Marine, Руководство по эксплуатации

Страница: 170 / 176

170 Rev. 09/2019
11.1 Maintenance Instructions
Please follow the following maintenance instructions:
– Do not use caustic liquids or steam cleaners for cleaning the device.
– Clean the passive pickups at regular intervals.
– Check the ignition wires at regular intervals.
– Replace the pickups at regular intervals if operating them under elevated temperature
conditions (> +90 °C / > +194 °F).
– Regularly inspect all wires of the ignition system for damage and replace the wires as
needed.
– Check all plug-in connections for proper condition.
– Service the spark plugs as per the instructions of the spark plug and engine manufacturers.
– Observe the required tightening torques:
– All M4 bolts: 0.8 Nm to 1 Nm (0.6 lb-ft to 0.7 lb-ft)
– PG screw joints: 4.5 Nm to 5 Nm (3.3 lb-ft to 3.6 lb-ft)
– Service screw: 2.5 Nm to 3 Nm (1.9 lb-ft to 2.2 lb-ft)
11.2
Spare Parts and Accessories
For spare parts and accessories for MIC6 ignition systems, please refer to our current product
guide, which is available for download on the Internet at
www.motortech.de .
11 Maintenance