Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1588 / 1723

CHASSIS ELECTRICAL –
Radio and Tape Player
54-77
RADIO AND TAPE PLAYER WITH ANTI-THEFT SYSTEM
54400430032
D
After the power supply to the radio and tape
player has been interrupted for an hour or more,
the anti-theft system will prevent the radio and
tape player from working, even if the power supply is restored. Problem with the anti-theft
system can be found using the flow chart below.
When the ignition key is in the ACC or ON position and the POWER
button is pressed, does “CODE” appear on the display?
No
Check and repair the connector or harness.
Yes
Can the security code be input to the display using the memory
select buttons?
No
Repair or replace the radio and tape player.
Yes
If the BAND button is pressed after security code has been input,
do the radio and tape player then work?
Yes
Normal
No
If the security code is not accepted, is “1 ERROR” displayed for
two seconds and then changes into “code” to wait for the next
input?
No
Repair or replace the radio and tape player.
Yes
If the BAND button are pressed after the security code has been
input again by means of the memory select buttons, do the radio
and tape player then work?
Yes
Normal (an incorrect code was input the first time)
No
If the security code is not accepted, is “2 ERROR” displayed for
two seconds and then changes into “code” to wait for the next
input?
No
Repair or replace the radio and tape player.
Yes
If the BAND button are pressed after the security code has been
input again by means of the memory select buttons, do the radio
and tape player then work?
Yes
Normal (an incorrect code was input the second time)
No
If the security code is not accepted, “3 ERROR” is displayed for
five seconds and then changes into “OFF”. Then the security code
can not be input any more. To input the security code again, turn
the ignition switch to the ACC or ON position and wait for one
hour when “OFF” is displayed. After “OFF” disappears on the display
and changes into “code”, the security code can be input again.