Mitsubishi MOTORS L200 1996, Руководство по ремонту, Страница: 1558 / 1723

CHASSIS ELECTRICAL –
Headlamp
54-47
INTENSITY MEASUREMENT
54200100074
Using a photometer, and following its manufacture’s instruction
manual, measure the headlamp intensity and check to be
sure that the limit value is satisfied.
Limit: 30,000 cd or more
NOTE
1.
When measuring the intensity, maintain an engine speed
of 2,000 r/min, with the battery in the charging condition.
2. There may be special local regulations pertaining to
headlamp intensity, be sure to make any adjustments
necessary to satisfy such regulations.
3. If an illuminometer is used to make the measurements,
convert its values to photometer values by using the
following formula.
I = Er
2
Where:
I = intensity (cd)
E = illumination (lux)
r = distance (m) from headlamps to illuminometer
BULB REPLACEMENT
54200130141
<Headlamp Bulb>
1. Disconnect the connector.
2. Remove the socket cover.
3. Unhook the spring which secures the bulb, and then
remove the bulb.
Caution
Do not touch the surface of the bulb with hands or
dirty gloves. If the surface does become dirty, clean
it with alcohol or thinner, and let it dry thoroughly
before installing.
Socket cover
Spring