Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1247 / 1723

3
ON-VEHICLE SERVICE
37100090043
STEERING WHEEL FREE PLAY CHECK
1. With engine running (hydraulic operation), set front wheels
straight ahead.
2. Measure the play on steering wheel circumference before
wheels start to move when slightly moving steering wheel in
both directions.
Limit: 50 mm
3. When play exceeds the limit, check for play on steering shaft
connection and steering linkage. Correct or replace.
4. If the free play still exceeds the limit value, set steering wheel
straight ahead with engine stopped. Load 5 N towards
steering wheel circumference and check play.
Standard value (steering wheel play with engine
stopped): 10 mm or less
If the play exceeds the standard value, check the steering
gear backlash and ball joint axial play.
STEERING ANGLE CHECK
37100100029
1. Place the front wheel on a turning radius gauge and measure
the steering angle.
Standard value:
Items Specifications
Inside wheel 29°40’ - 32°40’
Outside wheel 29°30’
2. If the steering angle is outside the standard value after
checking the toe-in (refer to GROUP 33A – On-Vehicle
Service), adjust the steering angle with the stopper bolt.
Caution
When the steering wheel is turned to lock, check
that the clearance between the knuckle and the
stopper is 1 mm or more.
STEERING – On-Vehicle Service
37A-7
13Z0002
13A0295
13V0090
00005027
13V0089
Stopper bolt
Stopper bolt
78 Nm
78 Nm
Pitman arm
Idler arm
<Added>
Lower arm
1 mm or more
Knuckle
X0520AA