Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1589 / 1723

CHASSIS ELECTRICAL –
Radio and Tape Player
54-78
PROCEDURE FOR INPUT OF SECURITY CODE FOR
RADIO AND TAPE PLAYER WITH ANTI-THEFT
SYSTEM
54400440042
The radio and tape player does not work in the following
states.
D
Power supply to the radio and tape player has been
suspended for more than an hour continuously by
removing the cable from the battery terminal for
disconnecting the harness connectors.
D
The power supply to the radio and tape player has been
suspended for more than an hour owing to blown fuse
or discharged battery.
D
The radio and tape player has been replaced.
If the radio and tape player does not work for these causes,
input the security code by the following procedure.
1. Using any of the following methods, confirm the security
code.
(1) Read the security code indicated on the cards retained
by the car.
(2) If the security code is unknown owing to the user’s
loss of the card:
a.
Remove the radio and tape player, referring to
P.54-80.
b. Read the serial No. stamped on the radio and
tape player.
c. Look up the security code (anti-theft code table)
corresponding to the serial number, or ask the
authorized Mitsubishi dealer.
(3) When the radio and tape player is replaced:
Read the security code on the cards attached to the
upper surface of the replacement radio and tape
player.
NOTE
Deliver the two cards to the user.
Card
Security code
Typical name card
SERIAL No.
Cards