Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1131 / 1723

ABS <4WD> –
General Information
35C-3
GENERAL INFORMATION
35200010130
The ABS consists of wheel speed sensors, stop
lamp switch hydraulic unit and the ABS-ECU. If
a problem occurs in the system, the malfunctioning
system can be identified by means of the diagnosis
function, and the trouble symptom memory will not
be erased even if the ignition switch is turned to OFF. (However, it will be erased if the battery is
disconnected.)
In addition, reading of diagnosis codes and data
list and actuator of testing are possible using the
MUT-
II .
Items Specifications
Speed sensor Magnet coil type
Front rotor teeth 47
Rear rotor teeth 47
CONSTRUCTION DIAGRAM
NOTE
*
1
: For R.H. drive vehicles, those parts are installed at the right side.
*
2
: Diesel-powered vehicles – L.H. drive vehicles.
*
3
: Except diesel-powered vehicles – L.H. drive vehicles.
1
2
3*
1
4*
1
5
6
7*
1
8*
1
9*
2
10
11
12
13
14
9*
3
6
5
6
5
1. ABS valve relay
2. ABS motor relay
3. ABS warning lamp
4. Stop lamp switch
5. Rotor
6. Wheel speed sensor
7. ABS-ECU 8. Diagnosis connector
9. Hydraulic unit
10. G-sensor
11. 4WD position detection switch
12. Free wheel engage switch
13. Rear differential lock-ECU
14. 4WD indicator-ECU