Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 407 / 1723

MPI –
Troubleshooting
13A-7
Display item list
Data item Unit
Engine coolant temperature sensor
_
C
Engine speed r/min
Vehicle speed km/h
Long-term fuel compensation (long-term fuel
trim) %
Short-term fuel compensation (short-term fuel
trim) %
Fuel control
condition Open loop OL
condition
Closed loop CL
Open loop owing to
drive condition OL-DRV.
Open loop owing to
system malfunction OL-SYS.
Closed loop based on
one oxygen sensor CL-H02S
Calculation load value %
Diagnosis code during data recording –
NOTE
If malfunctions have been detected in multiple systems, store
one malfunction only, which has been detected first.
READINESS TEST STATUS
The engine-ECU monitors the following main diagnosis items,
judges if these items are in good condition or not, and the
stores its history. This history can be read out by using MUT-
II .
(If the ECU has judged an item before, the MUT- II displays
“Complete.”)
In addition, if diagnosis codes are erased or the battery
cable is disconnected, this history will also be erased (the
memory will be reset).
D
Catalyst: P0420
D
Oxygen sensor: P0130
D
Oxygen sensor heater: P0135, P0141