Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1139 / 1723

ABS <4WD> –
Troubleshooting
35C-11
DATA LIST REFERENCE TABLE
35201150107
The following items can be read by the MUT-
II
from the ABS-ECU input data.
1. When the system is normal
Item No. Check item Checking requirements Normal value
11 Front-right wheel speed sensor
Perform a test run Vehicle speeds
displayed on the
12 Front-left wheel speed sensor
dis layed on the
speedometer
and MUT
II are
13 Rear-right wheel speed sensor
and MUT-
II
are
identical.
14 Rear-left wheel speed sensor
16 ABS-ECU power supply
voltage Ignition switch power supply voltage and valve
monitor voltage 9 – 16 V
25 Free wheel engage switch Engage 4WD ON
Engage 2WD OFF
26 4WD detection switch Place the transfer lever at 4H. ON
Place the transfer lever at 2H. OFF
27 Rear differential lock detection
switch Turn on the switch. ON
switch
Turn off the switch. OFF
32 G-sensor output voltage Stop the vehicle. 2.4 – 2.6 V
Perform a test run. Display value
fluctuates with a
mean value of
2.5 V.
33 Stop lamp switch Depress the brake pedal. ON
Release the brake pedal. OFF
2. When the ABS-ECU shut off ABS operation.
When the diagnosis system stops the ABS-ECU, the MUT- II display data will be unreliable.
ACTUATOR TEST INSPECTION TABLE
35201160056
Refer to GROUP 35B – Troubleshooting.