Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1628 / 1723

15
3. Within 10 seconds after connecting the MUT-II, turn
the ignition switch to ACC ON for 1 second an
then to OFF for 1 second; repeat this procedure
three times.
NOTE
The doors will lock and unlock once at this tim
and the system will switch to registration mode.
4. Press the lock switch or unlock switch; of th
transmitter switch, and then press it two times
within 10 seconds of the first press. This will regis-
ter the code.
5. After registration is completed, the doors will be
automatically locked and unlocked once.
6. If you are using two transmitters or have added a
second transmitter, the same registration proce-
dure should be carried out for the second trans-
mitter, and it should be carried out within one min-
ute after registration of the code for the first trans-
mitter has been completed. After the second regis-
tration is completed, the doors will be automatically
locked and unlocked once.
7. Registration mode will be terminated under the
following conditions.
•
When the secret codes for two transmitters hav
been registered;
•
When one minute has passed after registration
mode started;
•
If the MUT-II is disconnected (earth is released);
•
If the ignition switch is tuned to ON;
8. After registration mode has been completed, carry
out the followings to make sure that the keyless
entry system operates.
•
Pull the ignition key out.
•
Close the all doors.
BODY – Keyless Entry System
42-7
Ignition switch
Within 10 seconds
MUT- II connected
A18I0210
OFF
ACC