Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 164 / 1723

ENGINE <4D5> –
On-vehicle Service
11B-15
4. Loosen the tensioner pivot side bolt 1 turn and slot side
bolt 1 or 2 turns.
5. Turn the crankshaft clockwise and stop at the second
lobe of the camshaft sprocket.
6. First tighten tensioner slot side bolt, and then tighten
pivot side bolt to the specified torque.
Tightening torque: 25 Nm
7. Turn the crankshaft anti-clockwise to align the timing
marks.
8. Push down belt at a point halfway with a forefinger to
check that tension of belt is up to standard value.
Standard value: 4 – 5 mm
9. Mount the timing belt upper cover.
TIMING BELT “B” TENSION ADJUSTMENT
11100280143
1. Remove timing belt upper cover.
2. Turn the crankshaft in the clockwise direction and check
the timing belt around its entire circumference for
abnormalities.
3. Align the timing marks on the sprockets with the timing
mark on the front upper case.
Caution
When aligning the timing mark, be sure not to turn
the crankshaft in the counterclockwise direction as
this can cause improper belt tension.
Slot side
bolt
Pivot side
bolt
Camshaft sprocket
2 teeth
Timing marks
Timing marks