Mitsubishi MOTORS L200 1996, Руководство по ремонту

Страница: 1485 / 1723

21
INSPECTION PROCEDURE CLASSIFIED BY DIAGNOSTIC TROUBLE
Code No. 14 Analog G-sensor system in the SRS-ECU Probable cause
The SRS-ECU monitors the output of the analog G-sensor inside the SRS-ECU. It
outputs this code when any of the following are detected
•
When the analog-G sensor is not operating
•
When the characteristics of the analog-G sensor are abnormal
•
When the output from the analog G-sensor is abnormal
•
Malfunction of SRS-ECU
Replace the SRS-ECU
Code No.15 or 16 Safing G-sensor system in the SRS-ECU Probable cause
This code is output if there is a short or open circuit between the terminals of the
safing G-sensor inside the SRS-ECU.
The trouble causes for each diagnosis code No. Are as follows
•
Malfunction of SRS-ECU
Code No. Trouble Symptom
15 Short circuit in the safing G-sensor
16 Open circuit in the safing G-sensor
Replace the SRS-ECU
Code No. 21, 22 or 61 Air bag module (driver’s side squib)
system Probable cause
These diagnosis codes are output if there is abnormal resistance between the input
terminals of the air bag module (driver’s side squib).
The trouble causes for each code No. are as follows
•
Malfunction of clock spring
•
Open-circuit in clock spring due to inappropriate neutral
position
•
Malfunction of harnesses or connectors
•
Malfunction of air bag module (driver’s side squib)
•
Malfunction of SRS-ECU
SRS - Troubleshooting
52B-6
<Added>